These handlebars are constructed with seamless CNC mandrel bent 0.120” wall 4130 chromoly tubes. These TBW w/ insert handlebars work with regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module. These bars have slots on each side for stock H-D hand controls and an exit slot in the center for internal wiring.
Ape handlebars have a purpose beyond their classic chopper aesthetic, and that is to alter the bike's aerodynamic profile by raising the rider's hands level with or slightly above shoulder height. This increases the front profile going down the highway, which in turn reduces headwind pressure against the rider's chest at higher speeds. It's the same principle as a windshield, without the plastic appendage jutting off the forks. NOTE: Your motorcycle's clutch cable, brake line and/or hand control wires may not be long enough to safely install this bar. Double-check these components before taking the stock bars off your motorcycle.