FEULING OIL PUMP CORP. Race System Oil System with Short Travel Lifters M8, Gear or Chain Drive
FEULING OIL PUMP CORP.

Race System Oil System with Short Travel Lifters

M8, Gear or Chain Drive
7097ST
$1,642.93 CAD
In Stock
Includes FUELING® High Flow billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or FUELING® OE+ camplates. Increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil portholes throughout the camplate to the portholes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings. FUELING® oil pumps are bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psi Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function. FUELING® oil pump and camplate combination eliminate common pressure and scavenge issues associated with the factory oiling systems. FUELING® M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal. Quieter and smoother engine operation. Increase oil pressure, scavenge volume and engine oil flow. 42% more scavenge volume with port sizing, matched passages and holes to the engine case. 68% more oil volume to the crankshaft and connecting rod bearing. Engine temperatures run 15°-25° cooler. Oil temperatures run 15°-30° cooler. 10-30 lbs more psi of oil pressure. M-Eight Water-Cooled™ motor oil pump has 30% more pressure gear volume over stock and 53% more scavenge gear volume over stock. M-Eight Oil-Cooled™ motor pump has 27% more pressure and scavenge gear volume over stock. Eliminate wet sumping, blow by and oily air cleaners. Test results show 2 horsepower gain and 2 ft./lb. of torque gain to the rear wheel on M-Eight Includes a Race Series® oil pump, Race Series® full-travel or short- travel hydraulic roller lifters, High Flow camplate and cam installation kit, cam bearing, cam/?crank bolts and washers, engine and fastener assembly lube. Billet 7075 aluminum oil pump is 50% harder and stronger than the factory pump; holds tighter tolerances under temperature Race Series® oil pumps feature increased scavenge side kidney port volume over HP+ oil pumps Race Series® full-travel hydraulic lifters have a full .200” of total travel designed with a slower bleed down rate to handle heavy valve spring pressures, increase engine rpm before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the M-Eight front exhaust camshaft lobe flange. Race Series® short-travel hydraulic lifters have .115” of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine The travel reduction reduces the amount of oil that is required to fill the inside of the lifter which reduces oil aeration inside the lifter on steep, fast action high lift camshaft lobes Made in the USA Notes Optional FUELING® X ARP bolt kit available for the high flow camplate PART #0932-0192 and HP+ or RS oil pump combo. See PART #2401-0993, optional ARP oil pump bolts do not use washers. FUELING® test results show as much as 50% reduction of engine sump oil level. M-Eight engines must check clearance on front exhaust lifter to camshaft flange fit.
$1,642.93 CAD
In Stock
Maxx Cash $8.21 Information
Shipping FREE
Ships From Canada
Admin Edit Product  
SKU 100-4704
Brand FEULING OIL PUMP CORP.
Condition New
Free shipping on orders over $99
In Stock Online
Not at our Nanaimo shop
Maxx Cash Information
Login or Register to Collect
You will earn $8.21 Maxx Cash
To use on ANY future Maxx Powersports purchase

New products are being added daily, so check back often!

  • Earn Maxx Cash
    On Almost Every Purchase
  • 100% Canadian Owned
    Items ship from Canada
  • Free Shipping
    On most orders over $99
  • Shop Safely
    Secure payments, provided by Stripe
FEULING OIL PUMP CORP.
Race System Oil System with Short Travel Lifters
M8, Gear or Chain Drive
Includes FUELING® High Flow billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or FUELING® OE+ camplates. Increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil portholes throughout the camplate to the portholes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings. FUELING® oil pumps are bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psi Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function. FUELING® oil pump and camplate combination eliminate common pressure and scavenge issues associated with the factory oiling systems. FUELING® M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal. Quieter and smoother engine operation. Increase oil pressure, scavenge volume and engine oil flow. 42% more scavenge volume with port sizing, matched passages and holes to the engine case. 68% more oil volume to the crankshaft and connecting rod bearing. Engine temperatures run 15°-25° cooler. Oil temperatures run 15°-30° cooler. 10-30 lbs more psi of oil pressure. M-Eight Water-Cooled™ motor oil pump has 30% more pressure gear volume over stock and 53% more scavenge gear volume over stock. M-Eight Oil-Cooled™ motor pump has 27% more pressure and scavenge gear volume over stock. Eliminate wet sumping, blow by and oily air cleaners. Test results show 2 horsepower gain and 2 ft./lb. of torque gain to the rear wheel on M-Eight Includes a Race Series® oil pump, Race Series® full-travel or short- travel hydraulic roller lifters, High Flow camplate and cam installation kit, cam bearing, cam/?crank bolts and washers, engine and fastener assembly lube. Billet 7075 aluminum oil pump is 50% harder and stronger than the factory pump; holds tighter tolerances under temperature Race Series® oil pumps feature increased scavenge side kidney port volume over HP+ oil pumps Race Series® full-travel hydraulic lifters have a full .200” of total travel designed with a slower bleed down rate to handle heavy valve spring pressures, increase engine rpm before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the M-Eight front exhaust camshaft lobe flange. Race Series® short-travel hydraulic lifters have .115” of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine The travel reduction reduces the amount of oil that is required to fill the inside of the lifter which reduces oil aeration inside the lifter on steep, fast action high lift camshaft lobes Made in the USA Notes Optional FUELING® X ARP bolt kit available for the high flow camplate PART #0932-0192 and HP+ or RS oil pump combo. See PART #2401-0993, optional ARP oil pump bolts do not use washers. FUELING® test results show as much as 50% reduction of engine sump oil level. M-Eight engines must check clearance on front exhaust lifter to camshaft flange fit.
Maxx Cycle Canada
Shop Canada's Premium Source For Harley-Davidson® Aftermarket Parts
Your source for seats, handlebars, exhausts, tires, suspension, lights, and so much more...

Product Specifications

TYPE
Oil System
STYLE
Chain Drive / Gear Drive
MODEL
Race Series
MATERIAL
Aluminum
COLOUR/FINISH
Red
RIDING STYLE
Street
UNITS
Each

Manufacturer Information

Brand
FEULING OIL PUMP CORP.
OEM
7097ST
UPC
Country
United States

Shipping Dimensions

Length
14.00 inches
Width
9.00 inches
Height
3.50 inches
Weight
6.00 lbs
Information on technical characteristics, the delivery set, the country of manufacture, and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
Make Model Years
Harley-Davidson CVO Road Glide FLTRXSE 2018 - 2021
Harley-Davidson CVO Street Glide FLHXSE 2017 - 2021
Harley-Davidson Electra Glide Police FLHTPI 2017 - 2021
Harley-Davidson Electra Glide Revival 2021
Harley-Davidson Electra Glide Standard EFI FLHTI 2019 - 2021
Harley-Davidson Electra Glide Ultra Classic EFI FLHTCUI 2017 - 2019
Harley-Davidson FXDR 114 2019 - 2020
Harley-Davidson Road Glide Custom FLTRX 2017 - 2021
Harley-Davidson Road Glide Limited FLTRK 2020 - 2021
Harley-Davidson Road Glide Special FLTRXS 2017 - 2021
Harley-Davidson Road King EFI FLHR 2017 - 2021
Harley-Davidson Road King Special FLHRXS 2017 - 2021
Harley-Davidson Softail Breakout 114 FXBRS 2018 - 2020
Harley-Davidson Softail Breakout FXBR 2018 - 2019
Harley-Davidson Softail Deluxe FLDE 2018 - 2020
Harley-Davidson Softail Fat Bob 114 FXFBS 2018 - 2021
Harley-Davidson Softail Fat Bob FXFB 2018 - 2019
Harley-Davidson Softail Fat Boy 114 FLFBS 2018 - 2021
Harley-Davidson Softail Fat Boy FLFB 2018 - 2019
Harley-Davidson Softail Heritage Classic FLHCS 2018 - 2021
Harley-Davidson Softail Heritage Classic FLHC 2018 - 2021
Harley-Davidson Softail Low Rider FXLR 2018 - 2020
Harley-Davidson Softail Low Rider S FXLRS 2020 - 2021
Harley-Davidson Softail Slim FLSL 2018 - 2021
Harley-Davidson Softail Sport Glide FLSB 2018 - 2021
Harley-Davidson Softail Standard FXST 2020 - 2021
Harley-Davidson Softail Street Bob FXBB 2018 - 2021
Harley-Davidson Street Glide EFI FLHX 2017 - 2021
Harley-Davidson Street Glide Special FLHXS 2017 - 2021
Disclosure
This quick reference fitment information is provided to direct you to the manufacturer's information. Check your applicable laws and manufacturer's publication(s) and/or website(s) for manufacturer's warranty, maintenance, safety, mounting, fitment, and any regulatory compliance/non-compliance information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.