574 CAMS - Wicked power band for modified engines and an excellent bolt in for stock 103 & 110 engines. Works very well with 95, 106, 107, 114 big bore engines. This is a great all around camshaft with solid low end performance and mind blowing mid and top end power. Extremely smooth cam lobe design creates a very smooth valve-train motion. Responds very well to modified cylinder heads, increased compression ratio, performance exhaust and intake systems. Performance valve springs are required on 1999-2004 engines and performance pushrods, lifters and clutch modifications are recommended. RPM 2,400 - 6,500
UPDATE YOUR OLD MECHANICAL STYLE CAMS AND TENSIONERS TO THE NEW HYDRAULIC STYLE TENSIONER SYSTEM
Conversion camshafts for 1999-2006 Twin Cam engines utilize the 1999-2006 inner cam journals with the 2007-2016 outer cam journals allowing the use of the 2007-2016 camplates, oil pump, hydraulic chain tensioners and chain drive system.
*Conversion camshafts do not fit in a conversion camplate, conversion camshafts use the 2007-2017 camplate/oil pump
Twin Cam Conversion Chain Drive 1999 - 2006 (Except 06 Dyna)
Part # 1016¹ Maxx Cycle SKU (101-8596) - (525CC Conversion Cam) - 525 Intake, 535 Exhaust
Part # 1017¹ Maxx Cycle SKU (101-8597) - (574CC Conversion Cam) - 574 Intake, 574 Exhaust
Part # 1019¹ Maxx Cycle SKU (101-8599) - (594CC Conversion Cam) - 594 Intake, 604 Exhaust
See #8080 Maxx Cycle SKU (102-1842)
DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
REQUIRED COMPONENTS FOR CONVERSION CAMSHAFTS - SEE KIT #8080 Maxx Cycle SKU (102-1842) #7087 Maxx Cycle SKU (102-4611) & 7088 Maxx Cycle SKU (102-1849)
Installing conversion camshafts in 1999-2006 style T/C engines, require use the 2007-2017 style camplate and oil pump along with the following:
Qty. 1 FEULING #8061 Maxx Cycle SKU (102-1854) HD # 25675-06 Outer chain
Qty. 1 FEULING #8060 Maxx Cycle SKU (102-1855) HD # 25683-06 Inner chain
Qty. 1 FEULING #1091 Maxx Cycle SKU (102-1851)HD # 25673-06 Outer crank sprocket 17 tooth
Qty. 1 FEULING #1092 Maxx Cycle SKU (102-1850) HD # 25728-06 Outer cam sprocket 34 tooth
Qty. 1 FEULING #8075 Maxx Cycle SKU (102-1846) HD # 39968-06 Outer hydraulic tensioner unit
Qty. 1 FEULING #8076 Maxx Cycle SKU (102-1845) HD # 39969-06 Inner hydraulic tensioner unit
1 - Bolt kit (2 - 1/4-20 x 3/4) (2 - 1/4-20 x 1-1/4)
Qty. 1 FEULING #8041 Maxx Cycle SKU (101-8687) Spacer kit Includes the following note installation requires qty. 2 of the following spacers, NOTE: correct spacer thickness is a must for proper sprocket alignment
1-# 25729-06 Thrust washer - front cam .100
1- # 25731-06 Spacer (.110 for cam alignment; use as required)
1 - #25734-06 Spacer (.120 for cam alignment; use as required)
1 - #25736-06 Spacer (.130 for cam alignment; use as required)
1 - #25737-06 Spacer (.140 for cam alignment; use as required)
1 - #25738-06 Spacer (.150 for cam alignment; use as required)
NOTE: 1999-2001 engines with Magneti Marelli ignition requires use of Andrews sprocket #216015 in replacement of HD 34 tooth sprocket #25728-06 in order to install the new style outer cam chain