FEULING OIL PUMP CORP. Race Series Camchest Kit with Short Travel Lifters M8 Bagger, Reaper 521, Chain Drive
FEULING OIL PUMP CORP.

Race Series Camchest Kit with Short Travel Lifters

M8 Bagger, Reaper 521, Chain Drive, See Fitments for Specific Models
7266ST
$3,075.40 CAD
In Stock
Billet 7075 aluminum oil pump, which is 50% harder and stronger than the factory pump, holding tighter tolerances under temperature. Short travel hydraulic lifters have 0.115" of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine. Deeper scavenge kidney ports over the HP+ series for even more scavenge flow volume. 30% more pressure gear volume over stock for M-Eight Twin-Cooled motors. 53% more scavenge gear volume over stock for M-Eight Twin-Cooled motors. 27% more pressure and scavenge gear volume over stock for M-Eight Oil-Cooled motors. 42% more scavenge volume with port sizing, matched passages and holes to the engine case for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors. 68% more oil volume to the crankshaft and connecting rod bearing for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors. 15°-25° cooler engine temperatures for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors. 15°-30° cooler oil temperatures for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors. 10-30 more psi of oil pressure for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors. Increases oil pressure, scavenge volume and engine oil flow. Reduces wet sumping, blowby and oily air cleaners. Magnets in oil pump to help protect gears and pressure relief valve. Test results show 2 hp gain and 2 ft/lb of TQ gain to the rear wheel on M-Eight. Feuling test results show a 50% reduction of engine sump oil level. Kit includes: Race Series® high volume oil pump, High Flow billet camplate, Reaper® Series camshaft, Race Series® short hydraulic roller lifters, one piece pushrods, Timken®/ Koyo® cam bearings, rocker arm studs/ nuts, gaskets, O-rings, ARP® cam/ crank fasteners, washers, moly paste and Loctite® Made in the USA Notes Not for '23-'24 models with 121" VVT motor.
Key Features:
  • Requires high-lift/high-load valve spring.
  • Includes:
  • • Race Series® High Volume Oil Pump
  • • High Flow Billet Camplate
  • • Reaper Series® 592 Camshaft
  • • Race Series® Short Travel Lifters
  • • One Piece Pushrods
  • • Timken/Koyo Cam Bearing
  • • Rocker Arm Studs and Nuts
  • • Gaskets
  • • O-Rings
  • • ARP Cam/Crank Fasteners
  • • Washers
  • • Moly Lube
  • • Loctite
$3,075.40 CAD
In Stock
Maxx Cash $15.38 Information
Shipping FREE
Ships From Canada
Admin Edit Product  
SKU 102-1747
Brand FEULING OIL PUMP CORP.
Condition New
Free shipping on orders over $99
In Stock Online
Not at our Nanaimo shop
Maxx Cash Information
Login or Register to Collect
You will earn $15.38 Maxx Cash
To use on ANY future Maxx Powersports purchase

New products are being added daily, so check back often!

  • Earn Maxx Cash
    On Almost Every Purchase
  • 100% Canadian Owned
    Items ship from Canada
  • Free Shipping
    On most orders over $99
  • Shop Safely
    Secure payments, provided by Stripe
FEULING OIL PUMP CORP.
Race Series Camchest Kit with Short Travel Lifters
M8 Bagger, Reaper 521, Chain Drive, See Fitments for Specific Models
Billet 7075 aluminum oil pump, which is 50% harder and stronger than the factory pump, holding tighter tolerances under temperature. Short travel hydraulic lifters have 0.115" of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine. Deeper scavenge kidney ports over the HP+ series for even more scavenge flow volume. 30% more pressure gear volume over stock for M-Eight Twin-Cooled motors. 53% more scavenge gear volume over stock for M-Eight Twin-Cooled motors. 27% more pressure and scavenge gear volume over stock for M-Eight Oil-Cooled motors. 42% more scavenge volume with port sizing, matched passages and holes to the engine case for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors. 68% more oil volume to the crankshaft and connecting rod bearing for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors. 15°-25° cooler engine temperatures for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors. 15°-30° cooler oil temperatures for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors. 10-30 more psi of oil pressure for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors. Increases oil pressure, scavenge volume and engine oil flow. Reduces wet sumping, blowby and oily air cleaners. Magnets in oil pump to help protect gears and pressure relief valve. Test results show 2 hp gain and 2 ft/lb of TQ gain to the rear wheel on M-Eight. Feuling test results show a 50% reduction of engine sump oil level. Kit includes: Race Series® high volume oil pump, High Flow billet camplate, Reaper® Series camshaft, Race Series® short hydraulic roller lifters, one piece pushrods, Timken®/ Koyo® cam bearings, rocker arm studs/ nuts, gaskets, O-rings, ARP® cam/ crank fasteners, washers, moly paste and Loctite® Made in the USA Notes Not for '23-'24 models with 121" VVT motor.
Key Features:
  • Requires high-lift/high-load valve spring.
  • Includes:
  • • Race Series® High Volume Oil Pump
  • • High Flow Billet Camplate
  • • Reaper Series® 592 Camshaft
  • • Race Series® Short Travel Lifters
  • • One Piece Pushrods
  • • Timken/Koyo Cam Bearing
  • • Rocker Arm Studs and Nuts
  • • Gaskets
  • • O-Rings
  • • ARP Cam/Crank Fasteners
  • • Washers
  • • Moly Lube
  • • Loctite
Product Categories
Maxx Cycle Canada
Shop Canada's Premium Source For Harley-Davidson® Aftermarket Parts
Your source for seats, handlebars, exhausts, tires, suspension, lights, and so much more...

Product Specifications

TYPE
Chain
APPLICATION
Intake / Exhaust
MODEL
Race Series
GRIND
521 Series
INTAKE LIFT
0.518"
INTAKE OPEN
17°
INTAKE CLOSE
34°
INTAKE DURATION
231°
INTAKE LIFT AT TDC
0.162"
INTAKE LOBE CENTERLINE
98.5°
EXHAUST LIFT
0.521"
EXHAUST OPEN
51.5°
EXHAUST CLOSE
11.5°
EXHAUST DURATION
243°
EXHAUST LIFT AT TDC
0.125"
EXHAUST LOBE CENTERLINE
110°
FEATURES
Twin Cooled
UNITS
Kit
RIDING STYLE
Street

Manufacturer Information

Brand
FEULING OIL PUMP CORP.
OEM
7266ST
UPC
Country
United States

Shipping Dimensions

Length
16.00 inches
Width
11.00 inches
Height
6.00 inches
Weight
4.30 lbs
Information on technical characteristics, the delivery set, the country of manufacture, and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
Make Model Years
Harley-Davidson CVO Tri Glide FLHTCUTGSE 2020 - 2022
Harley-Davidson Electra Glide Ultra Limited FLHTK 2017 - 2024
Harley-Davidson Electra Glide Ultra Limited Low FLHTKL 2017 - 2019
Harley-Davidson CVO Electra Glide Ultra Limited FLHTKSE 2017 - 2021
Harley-Davidson Road Glide Ultra FLTRU 2017 - 2019
Disclosure
This quick reference fitment information is provided to direct you to the manufacturer's information. Check your applicable laws and manufacturer's publication(s) and/or website(s) for manufacturer's warranty, maintenance, safety, mounting, fitment, and any regulatory compliance/non-compliance information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.