FEULING OIL PUMP CORP. Vented Dipstick 2007-2016 Twin Cam Bagger, Polished
FEULING OIL PUMP CORP.

Vented Dipstick

2007-2016 Twin Cam Bagger, Polished
3091
$424.99 CAD
In Stock

Polished finish

GET THE MOST OUT OF YOUR TWIN CAM!

The FEULING billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve. Feuling vented dipsticks screw into the factory oil fill spout as a stock replacement part. These breathing dipsticks remove unwanted build-up of blow by pressure in the oil tank.

Blow by is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank. FEULING dipsticks help remove this unwanted pressure through a (CVS) Crankcase Ventilation System. Test results show a decrease in engine oil sump levels, more freely/smoother revving engine, increased MPG and decreased blow-by.

NOTE: All internal combustion engines have a certain amount of blow by. Larger cubic inch engines as well as engines with worn and or loose ring clearances will have increased blow by. Engines pushed to their limits will also produce excessive build up of power robbing blow by.

Feuling includes 2 venting styles (Options) to choose from when installing the dipstick:

OPTION 1.) 1/8 NPT breather vent fitting with internal porous filter element. This option gives a clean look however it can produce an oil misting/residue out of the element on engines with excessive leakdown/blow by.

OPTION 2.) Quick disconnect coupler fitting with rubber hose and filter element. This option will run any excessive oil misting/residue through the line and into the filter element. However this option does requires disconnecting the fitting in order to check the oil. This is Feulings preferred option as it breaths more than option 1.

For option 2, Feuling recommends routing the line up the frame rail, up under the seat/abs area then back down along the right side frame rail and the filter element can fit cleanly between the engine/trans matting area on the inside of the lower right frame rail.

Available in polished or fade resistant black finish

*This dipstick does get hot, use a glove when checking oil level

TECH TIP: Feuling highly recommends staying off the rev limiter and running conventional oil in the M8 engines to help maintain ring seal and minimize blow by.

Checking oil level There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) or the bike upright and level (FHU).

FHS = FULL HOT STAND If reading the dipstick with the bike on the jiffy stand you will take your reading from the dimples labelled FHS (Full Hot Stand).

FHU = FULL HOT UPRIGHT When reading the dipstick with the bike upright and level you will take the reading from the dimples labelled FHU (Full Hot Upright).

NOTE: Feuling in house testing shows venting the air cleaner to atmosphere may be problematic resulting in oil carry over/misting out of the breathers. When air filter venting is accompanied with the use of oil tank venting such as the Feuling vented dipstick and or a vented transmission top cover the oil carry over/misting can be increased.

FITS: TC bagger 07-16, polished cap

$424.99 CAD
In Stock
Maxx Cash $2.12 Information
Shipping FREE
Ships From Canada
Admin Edit Product  
SKU 102-1759
Brand FEULING OIL PUMP CORP.
Condition New
Free shipping on orders over $99
In Stock Online
Not at our Nanaimo shop
Maxx Cash Information
Login or Register to Collect
You will earn $2.12 Maxx Cash
To use on ANY future Maxx Powersports purchase

New products are being added daily, so check back often!

  • Earn Maxx Cash
    On Almost Every Purchase
  • 100% Canadian Owned
    Items ship from Canada
  • Free Shipping
    On most orders over $99
  • Shop Safely
    Secure payments, provided by Stripe
FEULING OIL PUMP CORP.
Vented Dipstick
2007-2016 Twin Cam Bagger, Polished

Polished finish

GET THE MOST OUT OF YOUR TWIN CAM!

The FEULING billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve. Feuling vented dipsticks screw into the factory oil fill spout as a stock replacement part. These breathing dipsticks remove unwanted build-up of blow by pressure in the oil tank.

Blow by is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank. FEULING dipsticks help remove this unwanted pressure through a (CVS) Crankcase Ventilation System. Test results show a decrease in engine oil sump levels, more freely/smoother revving engine, increased MPG and decreased blow-by.

NOTE: All internal combustion engines have a certain amount of blow by. Larger cubic inch engines as well as engines with worn and or loose ring clearances will have increased blow by. Engines pushed to their limits will also produce excessive build up of power robbing blow by.

Feuling includes 2 venting styles (Options) to choose from when installing the dipstick:

OPTION 1.) 1/8 NPT breather vent fitting with internal porous filter element. This option gives a clean look however it can produce an oil misting/residue out of the element on engines with excessive leakdown/blow by.

OPTION 2.) Quick disconnect coupler fitting with rubber hose and filter element. This option will run any excessive oil misting/residue through the line and into the filter element. However this option does requires disconnecting the fitting in order to check the oil. This is Feulings preferred option as it breaths more than option 1.

For option 2, Feuling recommends routing the line up the frame rail, up under the seat/abs area then back down along the right side frame rail and the filter element can fit cleanly between the engine/trans matting area on the inside of the lower right frame rail.

Available in polished or fade resistant black finish

*This dipstick does get hot, use a glove when checking oil level

TECH TIP: Feuling highly recommends staying off the rev limiter and running conventional oil in the M8 engines to help maintain ring seal and minimize blow by.

Checking oil level There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) or the bike upright and level (FHU).

FHS = FULL HOT STAND If reading the dipstick with the bike on the jiffy stand you will take your reading from the dimples labelled FHS (Full Hot Stand).

FHU = FULL HOT UPRIGHT When reading the dipstick with the bike upright and level you will take the reading from the dimples labelled FHU (Full Hot Upright).

NOTE: Feuling in house testing shows venting the air cleaner to atmosphere may be problematic resulting in oil carry over/misting out of the breathers. When air filter venting is accompanied with the use of oil tank venting such as the Feuling vented dipstick and or a vented transmission top cover the oil carry over/misting can be increased.

FITS: TC bagger 07-16, polished cap

Maxx Cycle Canada
Shop Canada's Premium Source For Harley-Davidson® Aftermarket Parts
Your source for seats, handlebars, exhausts, tires, suspension, lights, and so much more...

Product Specifications

PRODUCT NAME
Vented Dipstick
COLOR/FINISH
Polished
BASE COLOR
Silver
UNITS
Each
RIDING STYLE
Street

Manufacturer Information

Brand
FEULING OIL PUMP CORP.
OEM
3091
UPC
Country
United States

Shipping Dimensions

Length
8.75 inches
Width
8.00 inches
Height
2.00 inches
Weight
0.92 lbs
Information on technical characteristics, the delivery set, the country of manufacture, and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
Make Model Years
Harley-Davidson CVO Road King FLHRSE 2014
Harley-Davidson Electra Glide Police FLHTPI 2007 - 2016
Harley-Davidson Electra Glide Ultra Classic Low FLHTCUL 2014 - 2016
Harley-Davidson Road King FLHR 2007 - 2016
Harley-Davidson Road King Classic FLHRC 2007 - 2013
Harley-Davidson Road King Custom FLHRS 2007
Harley-Davidson Screamin' Eagle Road King FLHRSE3 2007
Harley-Davidson Screamin' Eagle Road King FLHRSE4 2008
Harley-Davidson CVO Road King FLHRSE5 2013
Harley-Davidson Electra Glide Standard FLHT 2007 - 2009
Harley-Davidson Electra Glide Classic FLHTC 2007 - 2013
Harley-Davidson Electra Glide Ultra Classic FLHTCU 2007 - 2016
Harley-Davidson Screamin' Eagle Electra Glide Ultra Classic FLHTCUSE2 2007
Harley-Davidson Screamin' Eagle Electra Glide Ultra Classic FLHTCUSE3 2008
Harley-Davidson CVO Electra Glide Ultra Classic FLHTCUSE4 2009
Harley-Davidson CVO Electra Glide Ultra Classic FLHTCUSE5 2010
Harley-Davidson CVO Electra Glide Ultra Classic FLHTCUSE6 2011
Harley-Davidson CVO Electra Glide Ultra Classic FLHTCUSE7 2012
Harley-Davidson CVO Electra Glide Ultra Classic FLHTCUSE8 2013
Harley-Davidson Tri Glide Ultra Classic FLHTCUTG 2009 - 2016
Harley-Davidson Electra Glide Ultra Limited FLHTK 2010 - 2016
Harley-Davidson Electra Glide Ultra Limited Low FLHTKL 2015 - 2016
Harley-Davidson CVO Electra Glide Ultra Limited FLHTKSE 2014 - 2016
Harley-Davidson Street Glide EFI FLHX 2007 - 2016
Harley-Davidson Street Glide Special FLHXS 2014 - 2016
Harley-Davidson CVO Street Glide FLHXSE 2010
Harley-Davidson CVO Street Glide FLHXSE 2015 - 2016
Harley-Davidson CVO Street Glide FLHXSE2 2011
Harley-Davidson CVO Street Glide FLHXSE3 2012
Harley-Davidson Street Glide Trike FLHXXX 2010 - 2011
Harley-Davidson Freewheeler FLRT 2015 - 2016
Harley-Davidson Road Glide FLTR 2007 - 2010
Harley-Davidson Road Glide FLTR 2016
Harley-Davidson CVO Road Glide FLTRSE3 2009
Harley-Davidson Road Glide Ultra FLTRU 2011 - 2013
Harley-Davidson Road Glide Ultra FLTRU 2016
Harley-Davidson CVO Road Glide Ultra FLTRUSE 2011
Harley-Davidson CVO Road Glide Ultra FLTRUSE 2015 - 2016
Harley-Davidson Road Glide Custom FLTRX 2015
Harley-Davidson Road Glide Custom FLTRX 2011 - 2013
Harley-Davidson Road Glide Special FLTRXS 2015 - 2016
Harley-Davidson CVO Road Glide FLTRXSE 2012
Harley-Davidson CVO Road Glide Custom FLTRXSE2 2013
Disclosure
This quick reference fitment information is provided to direct you to the manufacturer's information. Check your applicable laws and manufacturer's publication(s) and/or website(s) for manufacturer's warranty, maintenance, safety, mounting, fitment, and any regulatory compliance/non-compliance information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.