FEULING OIL PUMP CORP. Vented Dipstick 2018-2024 Softail, Polished
FEULING OIL PUMP CORP.

Vented Dipstick

2018-2024 Softail, Polished, See Fitments for Specific Models
3085
$451.15 CAD
In Stock

Polished finish

GET THE MOST OUT OF YOUR M-EIGHT!

The FEULING billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve. Feuling vented dipsticks screw into the factory oil fill spout as a stock replacement part. These breathing dipsticks remove unwanted build-up of blow by pressure in the oil tank.

Blow by is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank. FEULING dipsticks help remove this unwanted pressure through a (CVS) Crankcase Ventilation System. Test results show a decrease in engine oil sump levels, more freely/smoother revving engine, increased MPG and decreased blow-by.

NOTE: All internal combustion engines have a certain amount of blow by. Larger cubic inch engines as well as engines with worn and or loose ring clearances will have increased blow by. Engines pushed to their limits will also produce excessive build up of power robbing blow by.

Feuling includes 2 venting styles (Options) to choose from when installing the dipstick:

OPTION 1.) 1/8 NPT breather vent fitting with internal porous filter element. This option gives a clean look however it can produce an oil misting/residue out of the element on engines with excessive leakdown/blow by.

OPTION 2.) Quick disconnect coupler fitting with rubber hose and filter element. This option will run any excessive oil misting/residue through the line and into the filter element. However this option does requires disconnecting the fitting in order to check the oil. This is Feulings preferred option as it breaths more than option 1.

For option 2, Feuling recommends routing the line up the frame rail, up under the seat/abs area then back down along the right side frame rail and the filter element can fit cleanly between the engine/trans matting area on the inside of the lower right frame rail.

Available in polished or fade resistant black finish

*This dipstick does get hot, use a glove when checking oil level

Softail Dipstick oil separator: The oil separator inserts into the inner dipstick housing bore, alternating the ¾ OD perforated screens and spacers then the large perf screen, filter, aluminum perforated disc then umbrella valve. The smaller diameter spacer is the 2nd from bottom, the umbrella valve sits on top.

TECH TIP: Feuling highly recommends staying off the rev limiter and running conventional oil in the M8 engines to help maintain ring seal and minimize blow by.

Checking oil level There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) or the bike upright and level (FHU).

FHS = FULL HOT STAND If reading the dipstick with the bike on the jiffy stand you will take your reading from the dimples labelled FHS (Full Hot Stand).

FHU = FULL HOT UPRIGHT When reading the dipstick with the bike upright and level you will take the reading from the dimples labelled FHU (Full Hot Upright).

OIL LEVEL - DO NOT OVERFILL OIL TANK It is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot.

Note: The oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.

Feuling recommends the following steps to achieve proper oil level: 1. Check cold oil level. 2. Ride the bike until operating temperature is reached. 3. Shut the bike off while still in the upright position. (This insures an accurate reading) 4. Once the bike is on the kickstand check oil level. 5. Add or remove oil as needed

NOTE: Feuling in house testing shows venting the air cleaner to atmosphere may be problematic resulting in oil carry over/misting out of the breathers. When air filter venting is accompanied with the use of oil tank venting such as the Feuling vented dipstick and or a vented transmission top cover the oil carry over/misting can be increased.

FITS: M8 Softail 18-25, polished cap

$451.15 CAD
In Stock
Maxx Cash $2.26 Information
Shipping FREE
Ships From Canada
Admin Edit Product  
SKU 102-1763
Brand FEULING OIL PUMP CORP.
Condition New
Free shipping on orders over $99
In Stock Online
Not at our Nanaimo shop
Maxx Cash Information
Login or Register to Collect
You will earn $2.26 Maxx Cash
To use on ANY future Maxx Powersports purchase

New products are being added daily, so check back often!

  • Earn Maxx Cash
    On Almost Every Purchase
  • 100% Canadian Owned
    Items ship from Canada
  • Free Shipping
    On most orders over $99
  • Shop Safely
    Secure payments, provided by Stripe
FEULING OIL PUMP CORP.
Vented Dipstick
2018-2024 Softail, Polished, See Fitments for Specific Models

Polished finish

GET THE MOST OUT OF YOUR M-EIGHT!

The FEULING billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve. Feuling vented dipsticks screw into the factory oil fill spout as a stock replacement part. These breathing dipsticks remove unwanted build-up of blow by pressure in the oil tank.

Blow by is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank. FEULING dipsticks help remove this unwanted pressure through a (CVS) Crankcase Ventilation System. Test results show a decrease in engine oil sump levels, more freely/smoother revving engine, increased MPG and decreased blow-by.

NOTE: All internal combustion engines have a certain amount of blow by. Larger cubic inch engines as well as engines with worn and or loose ring clearances will have increased blow by. Engines pushed to their limits will also produce excessive build up of power robbing blow by.

Feuling includes 2 venting styles (Options) to choose from when installing the dipstick:

OPTION 1.) 1/8 NPT breather vent fitting with internal porous filter element. This option gives a clean look however it can produce an oil misting/residue out of the element on engines with excessive leakdown/blow by.

OPTION 2.) Quick disconnect coupler fitting with rubber hose and filter element. This option will run any excessive oil misting/residue through the line and into the filter element. However this option does requires disconnecting the fitting in order to check the oil. This is Feulings preferred option as it breaths more than option 1.

For option 2, Feuling recommends routing the line up the frame rail, up under the seat/abs area then back down along the right side frame rail and the filter element can fit cleanly between the engine/trans matting area on the inside of the lower right frame rail.

Available in polished or fade resistant black finish

*This dipstick does get hot, use a glove when checking oil level

Softail Dipstick oil separator: The oil separator inserts into the inner dipstick housing bore, alternating the ¾ OD perforated screens and spacers then the large perf screen, filter, aluminum perforated disc then umbrella valve. The smaller diameter spacer is the 2nd from bottom, the umbrella valve sits on top.

TECH TIP: Feuling highly recommends staying off the rev limiter and running conventional oil in the M8 engines to help maintain ring seal and minimize blow by.

Checking oil level There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) or the bike upright and level (FHU).

FHS = FULL HOT STAND If reading the dipstick with the bike on the jiffy stand you will take your reading from the dimples labelled FHS (Full Hot Stand).

FHU = FULL HOT UPRIGHT When reading the dipstick with the bike upright and level you will take the reading from the dimples labelled FHU (Full Hot Upright).

OIL LEVEL - DO NOT OVERFILL OIL TANK It is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot.

Note: The oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.

Feuling recommends the following steps to achieve proper oil level: 1. Check cold oil level. 2. Ride the bike until operating temperature is reached. 3. Shut the bike off while still in the upright position. (This insures an accurate reading) 4. Once the bike is on the kickstand check oil level. 5. Add or remove oil as needed

NOTE: Feuling in house testing shows venting the air cleaner to atmosphere may be problematic resulting in oil carry over/misting out of the breathers. When air filter venting is accompanied with the use of oil tank venting such as the Feuling vented dipstick and or a vented transmission top cover the oil carry over/misting can be increased.

FITS: M8 Softail 18-25, polished cap

Maxx Cycle Canada
Shop Canada's Premium Source For Harley-Davidson® Aftermarket Parts
Your source for seats, handlebars, exhausts, tires, suspension, lights, and so much more...

Product Specifications

PRODUCT NAME
VENTED DIPSTICK
COLOR/FINISH
POLISHED
BASE COLOR
SILVER
UNITS
EACH
RIDING STYLE
STREET

Manufacturer Information

Brand
FEULING OIL PUMP CORP.
OEM
3085
UPC
Country
United States

Shipping Dimensions

Length
8.50 inches
Width
8.50 inches
Height
2.00 inches
Weight
0.94 lbs
Information on technical characteristics, the delivery set, the country of manufacture, and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
Make Model Years
Harley-Davidson Softail Deluxe FLDE 2018 - 2020
Harley-Davidson Softail Fat Boy FLFB 2018 - 2019
Harley-Davidson Softail Fat Boy 114 FLFBS 2018 - 2024
Harley-Davidson Softail Heritage Classic FLHC 2018 - 2021
Harley-Davidson Softail Heritage Classic FLHCS 2018 - 2024
Harley-Davidson Hydra-Glide Revival FLI 2024
Harley-Davidson Softail Sport Glide FLSB 2018 - 2021
Harley-Davidson Softail Slim FLSL 2018 - 2021
Harley-Davidson Softail Street Bob FXBB 2018 - 2020
Harley-Davidson Street Bob 114 FXBBS 2021 - 2024
Harley-Davidson Softail Breakout FXBR 2018 - 2019
Harley-Davidson Softail Breakout FXBR 2023 - 2024
Harley-Davidson Softail Breakout 114 FXBRS 2018 - 2020
Harley-Davidson FXDR 114 FXDRS 2019 - 2020
Harley-Davidson Softail Fat Bob FXFB 2018 - 2019
Harley-Davidson Softail Fat Bob 114 FXFBS 2018 - 2021
Harley-Davidson Softail Fat Bob 114 FXFBS 2023
Harley-Davidson Softail Low Rider FXLR 2018 - 2020
Harley-Davidson Softail Low Rider S FXLRS 2020 - 2024
Harley-Davidson Softail Low Rider ST FXLRST 2022 - 2024
Harley-Davidson Softail Low Rider El Diablo FXRST 2022
Harley-Davidson Softail Standard 107 FXST 2020 - 2024
Harley-Davidson Softail Street Bob FXBB 2022
Disclosure
This quick reference fitment information is provided to direct you to the manufacturer's information. Check your applicable laws and manufacturer's publication(s) and/or website(s) for manufacturer's warranty, maintenance, safety, mounting, fitment, and any regulatory compliance/non-compliance information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.