Menu
Wishlist Account Login Register Cart
About Us
Maxx Cash
Login
Register
Admin
Logout
Guest Account
Shopping Cart $0.00
Your Cart is Empty
Filters

Filters

For any Model
  • Earn 2% Maxx Cash
    On Almost Every Purchase
  • 100% Canadian Owned
    Items ship from Canada*
    * Unless specified otherwise
  • Free Shipping
    Minimum order $99
  • Shop Safely
    Only secure payments
25 Items Found
Active Search
Image
SKU
Product
Status
Price
Deluxe Piston Pin Tool
In Stock
  • Works on both full skirt and short skirt (slipper) pistons
  • Fits all piston pins from 12 mm (1/2") to 24 mm (1")
  • Non-marring aluminum pin adapters
  • Interchangeable piston adapters
More...
$75.40 CAD
 
MAXX CASH Information
$1.51
Rear Axle Torque Adapter Tool
In Stock
More...
$85.57 CAD
 
MAXX CASH Information
$1.71
Cam/Crank Sprocket Lock Tool
In Stock
  • Designed to lock the camshafts and crankshaft sprockets when removing, replacing and torquing the sprocket bolts
  • Comes with instructions
  • Made in the U.S.A.
More...
$145.28 CAD
 
MAXX CASH Information
$2.91
Inner Cam Bearing Removal Tool
In Stock
  • Used to remove inner cam bearing without damaging the crankcase
  • Tool is also designed to keep rollers from falling into the crankcase
  • Comes with instructions
  • Made in the U.S.A.
More...
$500.58 CAD
 
MAXX CASH Information
$10.01
Case Splitter Tool
In Stock
  • "Breaks" the case sealant by pushing apart both case halves
  • Uses included hand thread-in pushing screw
  • Flywheels will be pushed from the left case
  • Bolts to primary mounting holes
  • Made in the U.S.A.
More...
$517.41 CAD
 
MAXX CASH Information
$10.35
Cam Assembly Tool
In Stock
  • Holds both cams in an upright position while lowering cam support plate over both guides and cam journal guides
  • Made from a non-marring material that will not damage any of the cams' surfaces
  • Made in the U.S.A.
More...
$397.60 CAD
 
MAXX CASH Information
$7.95
Primary Locking Bar Tool
In Stock
  • Immobilizes primary drive
  • Allows for tightening with a torque wrench or loosening with a breaker bar
  • Prevents damage to rotor or magnets sometimes caused by air-wrench
  • Made in the U.S.A.
More...
$123.54 CAD
 
MAXX CASH Information
$2.47
Shifter Shaft Sleeve Tool
In Stock
  • Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum
  • Use to install shifter shaft sleeve
  • Made in the U.S.A.
More...
$86.94 CAD
 
MAXX CASH Information
$1.74
Tappet Block Alignment Tool Also Used to Align Twin Cam Oil Pump
In Stock
  • Can also be used to align rocker box bases on Evolution head (requires two tools)
  • Also used in Harley-Davidson® Twin Cam oil pump alignment applications
  • Used to align oil hole from crankcase to tappet block
  • Made in the U.S.A.
More...
$51.95 CAD
 
MAXX CASH Information
$1.04
5-Speed Transmission Main Drive Gear Tool
Out of Stock
  • Installs the main drive gear without removing the transmission
  • Used to remove and install the main drive gear
  • Made in the USA
More...
$622.84 CAD
 
MAXX CASH Information
$12.46
In-Line Spark Tester
In Stock
  • Works on all ignition systems, including distributorless ignitions
  • Supplies a quick, easy visual check of ignition system
  • Made in the U.S.A.
More...
$76.70 CAD
 
MAXX CASH Information
$1.53
5-Speed Main Case Seal Installer Tool
Out of Stock
  • Ensures correct alignment, seal protection and depth when installing the seal
  • Made in the USA
More...
$155.43 CAD
 
MAXX CASH Information
$3.11
Ultimate Clutch Adjusting Tool
In Stock
  • Allows the quick and accurate tightening of the clutch adjusting screw jam nut without having the screw change position
  • No more guessing or making multiple attempts to lock the nut and adjuster screw in the proper place
  • For all '85-'19 Big Twins with mechanical clutch
  • Made in the U.S.A.
More...
$149.45 CAD
 
MAXX CASH Information
$2.99
Sealed Wheel Bearing Remover/Installer Kit
Out of Stock
  • Removes and installs 3/4", 1" and 25 mm wheel bearing with or without Anti-Locking Brake System (ABS)
  • Made in the U.S.A.
More...
$831.13 CAD
 
MAXX CASH Information
$16.62
5 Speed Transmission Case Shifter Shaft Seal Installer
Out of Stock
  • Makes installing shifter shaft seal precise and effortless
  • Aligns, centers and installs shifter seal to correct depth
  • Made in the U.S.A.
More...
$83.96 CAD
 
MAXX CASH Information
$1.68
Cam/Crankshaft Guide
Out of Stock
  • Spreads the crankcase pinion bearing rollers when reassembling right side case to the flywheel assembly
  • Made in the U.S.A.
More...
$82.28 CAD
 
MAXX CASH Information
$1.65
Balance Shaft Retention Pins
In Stock
  • Lock into balancer shaft sprocket pinholes to prevent balancer from turning out of sync with flywheel
  • Use to secure balancers when servicing the flywheel assembly
  • Made in the U.S.A.
More...
$54.90 CAD
 
MAXX CASH Information
$1.10
Cylinder Torque Plates Kit
In Stock
  • Torque plates must be used when boring or honing late-model aluminum cylinders
  • Simulate running stress conditions
  • Come with instructions
  • Made in the U.S.A.
More...
$936.90 CAD
 
MAXX CASH Information
$18.74
Remote Fuel Supply Tank For Fuel-injected Motorcycles
In Stock
  • Tank is completely mobile, even when pressurized; canister does not need to be continuously connected to the air supply
  • Small enough to hang from a handlebar, be attached to a wall mount, work bench or rollaway tool chest
  • Tank includes all necessary OEM fittings to plug directly into the fuel rail, valve and air pressure gauge
  • Run EFI motorcycles for testing, service and diagnostics with the stock fuel tank removed
  • This allows the tank to be properly pressurized for sending fuel to an EFI system
  • Made in the U.S.A.
More...
$776.96 CAD
 
MAXX CASH Information
$15.54
Ignition Switch Housing Alignment Tools
In Stock
  • Also used to position switch in the correct orientation for properly activating the fork lock
  • Proper alignment of the switch will extend the life of the ignition switch housing
  • Align ignition switch housing as retaining screws are being torqued
  • Made in the U.S.A.
More...
$216.22 CAD
 
MAXX CASH Information
$4.32
Camshaft Removal/Installation Tool
In Stock
  • This multi-function tool will remove and replace front and rear camshafts and the ball bearings in the Twin Cam 88
  • It provides the precision alignment of the camshaft to ensure a smooth press in and out of the support plate
  • Made in the U.S.A.
More...
$448.43 CAD
 
MAXX CASH Information
$8.97
Cam/Crank Sprocket Lock Tool
In Stock
  • Designed to lock the camshafts and crankshaft sprockets when removing, replacing and torquing the sprocket bolts
  • Comes with instructions
  • Made in the U.S.A.
More...
$111.51 CAD
 
MAXX CASH Information
$2.23
Cam Chain Tensioner Tool
In Stock
  • Designed to unload the pressure on the primary and secondary chain tensioners to assemble and disassemble cams
  • Also checks spring loads on chain tensioners
  • Comes with instructions
  • Made in the U.S.A.
More...
$123.96 CAD
 
MAXX CASH Information
$2.48
Mainshaft Bearing Race Tool
In Stock
  • Used to remove and install the inner bearing race on the transmission mainshaft
  • Made in the U.S.A.
More...
$469.55 CAD
 
MAXX CASH Information
$9.39
Valve Spring Compressor
In Stock
  • Comes with new valve collar receiver for safer tool usage, and can be clamped in vice
  • Hardened ball bearing style tip at valve head end eliminates damage to valve
  • This tool is necessary for removing or installing valves
  • Made in the U.S.A.
More...
$469.96 CAD
 
MAXX CASH Information
$9.40
Page 1 of 1